PHILIPS MI80 lantern
This is a PHILIPS MI80 lantern .This has got integtral gear in it for a 55W SOX bulb .This has got a NEMA socket in it with a SELC 841 photocell . I bought this lantern in 2002. I bought this from a place near MINEHEAD in SOMERSET .I bought this lantern with out a photocell and bulb. |
|
This is inside of the PHILIPS MI80 lantern .This has got a 35W SOX bulb in it. |
|
This is inside of the PHILIPS MI80 lantern .I have cleaned it and repaired it in the summer 2004 . This had a faulty igniter in it and I replaced it and it now works .When I bought this lantern the control gear was bypassed . |
Control gear |
Code Number |
Bulb size |
ratings |
|
Ballast |
PHILIPS BSX355L82 |
55w SOX |
22.2 ohms |
This limit the current to the bulb. |
Ignitor |
PHILIPS SX72 |
|
2.72kohms |
This produce the high voltage to start the bulb. |
Capacitor |
|
|
6.5uf |
This corrects the Power Factor (PF). |
Fault list |
If when a ignitor goes wrong ,nothing happens and the bulb don't light up. To make it work ,you need to replace the ignitor. |
If when a Capacitor goes wrong it will effects the PF of the circuit which effects the current of the circuit . It will run at more current or less current then normal. |
If when a Ballast goes wrong ,nothing happens and the bulb don't light up. |
Back to COLLECTION PAGE
UPDATED 23 8 2008 |
TIM COPYRIGHT 1999 / 2000/2001/2002 /2003/ 2004 / 2005/2006/2007/2008
THIS PAGE STARTED IN FEB 2005
I AM NOT LIBLE .
NO LIABILITY CAN BE ACCEPTED FOR THE ABOVE INFORMATION WHICH IS GIVEN FOR GUIDANCE ONLY
I am not responable for the content of the External Web sites.